TNC connector series - Hardware mould - Shenzhen Sinrui Technology Co. Ltd.

Your location: Home → Products → RF coaxial connectors > TNC connector series

Products Products

Your current location: Home → Products → RF coaxial connectors > TNC connector series

Products 产品中心

热销产品 / Hot Products More+

New underwater drone Model T1 integrated with 4K camera, eyes of the ocean diving to 150m depth

2019 - 10 - 23

Professional deep sea star level 4K camera, 1 / 2.9 inch CMOS image sensor, easy to take high-resolution pictures and videos, record wonderful. 32G large-capacity body storage, worry-free storage and ...

Trident underwater scooter diving equipment operating 45 minutes

2019 - 10 - 23

1.Built-in only chip, intelligent power detection, two high-quality batteries continue to cruise, low battery automatic warning. Simple operation mode, high speed and low speed, 60mins lasting life, s...

SMA-KHD16

2019 - 10 - 18

female connector soldered for micro stripe 16

SMA-KFD57

2019 - 10 - 18

female connector with two holes of flanged for micro stripe

M16 Circular waterproof stainless steel connectors 2 Cores with cables(1)

2019 - 10 - 18

M16 screw thread coupling connector with stainless steel shell a couple of male plug and female socket with cable

40GHz 2.92mm female with flange 4 holes 50Ohms for PCB Mounting

2019 - 09 - 28

40GHz 2.92mm female with flange 4 holes 50Ohms for PCB Mounting

Contact information

Contact address: 4th Floor, Building 7, Huafeng Technology Park, Tangwei Community, Fuhai Street, Baoan District, Shenzhen

Mobile phone：18925206338

Fax：(+86)755-26738082 / 26738348

E-mail：sales@sinruitech.com

TNC-JFD

TNC Male connector with 4 holes flange for PCB Mounting

TNC connector male center contact with flange for PCB Mounting, for DC 11GHz frequency. Its interface is screw type. Its body is brass plated nickel, its center contact is brass plated gold.

在线订购

N/A

TNC-KYW3Y

TNC connectors are very similar to the BNC connector. The main difference is that it has a screw fitting instead of the bayonet one. Most TNC connectors are specified to 11 GHz, and some may be able to operate to 18 GHz. Chosen for their durability and reliability, TNC connectors are widely used in the cellular/mobile communication industry for equipment cabling and antenna interfaces.

在线订购

N/A

TNC-KY4/5

在线订购

N/A

TNC-KKK

在线订购

N/A

TNC-KKF

在线订购

N/A

TNC-KF3/4/5

在线订购

N/A

TNC-KB2/3

在线订购

N/A

TNC-JWB3

在线订购

N/A

TNC-JJ

在线订购

N/A

TNC-50KFD12

在线订购

N/A

TNC-J4Y/5Y

在线订购

N/A

TNC-J3Y

在线订购

共33条页次1/3Home 123 尾页

News / 相关新闻 More

(MMBX)MMXX coaxial connector

The number of clicks: 30

2019 - 02 - 25

The MMXX connector is specially designed for rf board to board connection and rf board to module connection.MMXX's excellent mechanical design enables it to handle radial and axial mechanical deviations while still maintaining excellent electrical performance.MMXX provides the answer for the development of higher integration and miniaturization.MMXX connector is mainly used to connect board to board or module to module.It can be used instead of cable assemblies, thus greatly reducing the space occupied.Make a qualitative change in the design of the device.In addition, the connector can implement multiple PCBS or complex stacks between modules.It is a perfect solution for board - to - board and multi - point connection with blind plug function and work margin. Specifications:Connec...
SMC coaxial connector

The number of clicks: 30

2019 - 02 - 25

SMC connectors provide a good combination of small size and performance and are available in 50ohm or 75 ohm impedances. It offers excellent electrical performance from DC to 11 Ghz. This version is similar to the SMB connector, but it uses a threaded coupling interface rather than the Snap-on connection. The threaded coupling mechanism permits a vibration-proof connection which is ideal for semi-permanent connections and for the use in mobile equipment with low VSWR requirements. Description:Connector type: SMCCase: brass platedCenter conductor: brass platedInsulator: PTFEType of central conductor: femaleStructure: straightInstallation: solder PCBCable type: noneElectrical performance:Frequency: DC 11 GhzImpedance: 50 ohmTemperature: 65 ℃ to + 180 ℃Insulation impedance: Min 100...
SMB rf coaxial connectors

The number of clicks: 30

2019 - 02 - 25

SMB connectors feature a quick connect Snap-On coupling and are available either in 50ohm or 75ohm impedance. It offers excellent electrical performance from DC to 4 Ghz. This series of connectors conforms to MIL-C-39012. This version is smaller than SMA connectors. They are used for inter board or assembly connections within equipment. Temperature range: - 65 ~ + 165 ° C (PE Cable - 40 ~ + 85 ° C)Vibration: Vibration mil-std-202,Method 213The characteristic impedance: 50 Ω Ω / 75Frequency range: DC ~ 4GHzOperating voltage: 250V Max (effective value)Pressure resistance: 750V RMS (minimum sea level)Contact resistance:Between the inner conductor: 6 m or less ΩBetween the outer conductor: 1 m or less ΩInsulation resistance: 1000 M Ω or higherInsertion loss: 0.15db /4GHzVoltage ...
SMA rf coaxial connector

The number of clicks: 61

2019 - 02 - 25

The series of SMA connector is a precision sub-minimal connector interface for coaxial cable with a screw type coupling mechanism. The connector has 50 ohm impedance. It offers excellent electrical performance from DC to 18Ghz. It is often used for providing RF connectivity between cables, boards, and many microwave components including filters, attenuators, mixers, and oscillators. SMA and precision SMA-like connectors are by far the most popular, small, threaded coaxial connectors. The main technical specifications of SMA connectors are as follows:Temperature range: - 65 ~ + 165 ° C (PE Cable - 40 ~ + 85 ° C)Vibration: Vibration mil-std-202,Method 213The characteristic impedance: 50 Ω Ω / 75Frequency range: DC ~ 12.4ghz (semi-rigid cable 0 ~ 18GHz)Operating voltage:...