购物车图片 购物车 [ ]
Products Products
Products 产品中心
Hot Products / Hot Products More+
2019 - 10 - 23
Professional deep sea star level 4K camera, 1 / 2.9 inch CMOS image sensor, easy to take high-resolution pictures and videos, record wonderful. 32G large-capacity body storage, worry-free storage and ...
2019 - 10 - 23
1.Built-in only chip, intelligent power detection, two high-quality batteries continue to cruise, low battery automatic warning. Simple operation mode, high speed and low speed, 60mins lasting life, s...
2019 - 10 - 18
female connector soldered for micro stripe 16
2019 - 10 - 18
female connector with two holes of flanged for micro stripe
2019 - 10 - 18
M16  screw thread coupling connector with stainless steel shell a couple of male plug and female socket with cable
2019 - 09 - 28
40GHz 2.92mm female with flange 4 holes 50Ohms for PCB Mounting
Contact information

Contact address: 4th Floor, Building 7, Huafeng Technology Park, Tangwei Community, Fuhai Street, Baoan District, Shenzhen

Mobile phone:18925206338

Fax:(+86)755-26738082 / 26738348

E-mail:sales@sinruitech.com

TNC connectors are very similar to the BNC connector. The main difference is that it has a screw fitting instead of the bayonet one. Most TNC connectors are specified to 11 GHz, and some may be able t...
SMA connector is a precision sub-minimal connector interface for coaxial cable with a screw type coupling mechanism. The connector has a 50Ω impedance. It offers excellent electrical performance from ...
SMB connectors feature a quick connect/disconnect snap-on coupling and are available either in 50 Ω or 75 Ω impedances. It offers excellent electrical performance from DC to 4 GHz. This series of conn...
SMC connectors provide a good combination of small size and performance and are available in 50 Ω or 75 Ω impedances. It offers excellent electrical performance from DC to 11 GHz. This version is simi...
BNC connectors have a bayonet-lock interface. It exists in 50 and 75 ohm versions. Typically, they are specified for use at frequencies up to 4 and 2 GHz, respectively. BNC connectors are the most pre...
SSMA connectors are micro miniature in size with high precision and high reliability, and are suitable where space is limited. The electrical characteristics allow for very low VSWR and have a theoret...
BMA connectors are compact, high-frequency connectors with slide-on mating, approximately the same size as SMA connectors. It offers good electrical performance up to 18GHz. These connectors are desig...
MCX connectors use a snap-on interface and usually have a 50 ohm impedance. It offers broadband capability from DC to 6 GHz. They have the same inner contact and insulator dimensions as the SMB connec...
MMCX connectors are micro-miniature connectors with a lock-snap mechanism allowing for 360 degrees rotation and usually have a 50 ohm impedance. MMCX connectors are designed for frequency ranges from ...
N connectors have a threaded coupling interface to ensure that it mates correctly. It is available in either 50Ω or 75Ω versions. These two versions have subtle mechanical differences that do not allo...
L29 connectors are a screw coupling unit designed specifically to handle high power while suppressing inter-modulation products. The connector is most widely used in communication systems such as mobi...
2.92mm connectors are precision connectors for microwave applications up to 40 GHz. They are intermateable with series SMA and PC 3.5. They have a high mechanical stability and an excellent repeatabil...
MMXX (MMBX) connectors are exclusively used in the connection of “board to board” and “board to module”. It can handle radial and axial misalignment errors due to its excellent mechanical design while...
0页次0/0首页 尾页
相关新闻 / News More
  • 点击次数: 26
    2019 - 02 - 25
    The MMXX connector is specially designed for rf board to board connection and rf board to module connection.MMXX's excellent mechanical design enables it to handle radial and axial mechanical deviations while still maintaining excellent electrical performance.MMXX provides the answer for the development of higher integration and miniaturization.MMXX connector is mainly used to connect board to board or module to module.It can be used instead of cable assemblies, thus greatly reducing the space occupied.Make a qualitative change in the design of the device.In addition, the connector can implement multiple PCBS or complex stacks between modules.It is a perfect solution for board - to - board and multi - point connection with blind plug function and work margin. Specifications:Connec...
  • 点击次数: 23
    2019 - 02 - 25
    SMC connectors provide a good combination of small size and performance and are available in 50ohm or 75 ohm impedances. It offers excellent electrical performance from DC to 11 Ghz. This version is similar to the SMB connector, but it uses a threaded coupling interface rather than the Snap-on connection. The threaded coupling mechanism permits a vibration-proof connection which is ideal for semi-permanent connections and for the use in mobile equipment with low VSWR requirements.  Description:Connector type: SMCCase: brass platedCenter conductor: brass platedInsulator: PTFEType of central conductor: femaleStructure: straightInstallation: solder PCBCable type: noneElectrical performance:Frequency: DC 11 GhzImpedance: 50 ohmTemperature: 65 ℃ to + 180 ℃Insulation impedance: Min 100...
  • 点击次数: 22
    2019 - 02 - 25
    SMB connectors feature a quick connect Snap-On coupling and are available either in 50ohm or 75ohm impedance. It offers excellent electrical performance from DC to 4 Ghz. This series of connectors conforms to MIL-C-39012. This version is smaller than SMA connectors. They are used for inter board or assembly connections within equipment. Temperature range: - 65 ~ + 165 ° C (PE Cable - 40 ~ + 85 ° C)Vibration: Vibration mil-std-202,Method 213The characteristic impedance: 50 Ω Ω / 75Frequency range: DC ~ 4GHzOperating voltage: 250V Max (effective value)Pressure resistance: 750V RMS (minimum sea level)Contact resistance:Between the inner conductor: 6 m or less ΩBetween the outer conductor: 1 m or less ΩInsulation resistance: 1000 M Ω or higherInsertion loss: 0.15db /4GHzVoltage ...
  • 点击次数: 54
    2019 - 02 - 25
    The series of SMA connector is a precision sub-minimal connector interface for coaxial cable with a screw type coupling mechanism. The connector has 50 ohm impedance. It offers excellent electrical performance from DC to 18Ghz. It is often used for providing RF connectivity between cables, boards, and many microwave components including filters, attenuators, mixers, and oscillators. SMA and precision SMA-like connectors are by far the most popular, small, threaded coaxial connectors.   The main technical specifications of SMA connectors are as follows:Temperature range: - 65 ~ + 165 ° C (PE Cable - 40 ~ + 85 ° C)Vibration: Vibration mil-std-202,Method 213The characteristic impedance: 50 Ω Ω / 75Frequency range: DC ~ 12.4ghz (semi-rigid cable 0 ~ 18GHz)Operating voltage:...
Shenzhen Sinrui Technology Co., Ltd.
Address:4th Floor, Building 7, Huafeng Technology Park, Tangwei Community, Fuhai Street, Baoan District, Shenzhen
Tel.:( 86)755-26738082 / 26738348 18925206338
Cel. : ( 86)16620983840
Sales mailbox: sales@sinruitech.com / yg@sinruitech.com
Links:
Copyright ©2019 - 2022 Shenzhen Sinrui Technology Co., Ltd.
Rhino Cloud provides enterprise cloud services
犀牛云提供企业云服务
Sweeping attention Mobile website